Go to global navigation

Read the article

Go to local navigation

Go to footer



Climate control equipment

Home > Climate control equipment > Indoor enclosure cooler "COOLCABI" lineup > Non-fluorocarbon Condensate-free type

Non-fluorocarbon Condensate-free type


Wide input voltage from 200 to 240VAC, No condensate water drainage

COOLCABI Wide range Conensate-free

Features

Installation Use environment Cooling system Type Function Obligatory inspection by Japanese law Specifications
Lateral mounting
(External)
Duct connection available Indoor Compressor
Condensate-free Energy saving mode N/A Wide input voltage
Louver (option) Display function RS485 equipped

Awarded 2014 Global Warming Prevention Activity by Japan's Environment Minister in the Technological Development and Commercialization category for
"Reducing greenhouse gases by developing low GWP enclosure coolers"

Certificates/Approvals

EU RoHS2 China RoHS CE UL CCC CSA PSE

Model/Specification

Model OCA-H350BCD-AW2 OCA-H700BCD-AW2 OCA-H1300BCD-A200 OCA-H2300BCD-AW2
Type of mounting Lateral mounting
Cooling capacity *1 300/350W 600/700W 1100/1300W 2100/2300W
Rated voltage(50/60Hz) *2 Single phase 200 to 240VAC
Rated current consumption*3 200V 1.1/1.4A 2.1/2.7A 2.7/3.5A 5.3/5.6A
220V 1.1/1.4A 2.3/2.7A 2.9/3.5A 6.0/5.4A
240V 1.3/1.4A 2.8/2.7A 3.3/3.4A 7.5/5.4A
Max. current consumption*3 1.5/1.6A 3.1/3.1A 3.8/4.1A 8.1/7.3A
Starting current 4.8/4.7A 10.5/10.0A 15.9/14.4A 35.1/30.9A
Rated power consumption *3 200V 210/260W 410/440W 530/660W 990/1100W
220V 240/280W 500/480W 600/710W 1120/1180W
240V 280/310W 620/540W 690/780W 1340/1270W
Max. power consumption *3 340/360W 710/640W 830/930W 1610/1560W
Working temperature *3 +20 to +50℃
Working humidity Not exceeding 85%RH, free from condensation
Noise 64dB (A) 64dB(A) 62dB(A) 65dB(A)
Temp. setting range *3 +30 to+45℃ (Default +35℃)
Precondition for condensate-free +35℃ , not exceeding 85%RH
Display Internal temperature/Alarm code/Operation lamp (Green)/Alarm lamp (Red)
Function Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection,
Maintenance reminder, Forced cooling operation for inspection
Alarm output No-voltage contact output 1a x 2 (COMMON) 250VAC 2A 30VDC 2A
Communication function RS485 2-wire system (Modbus RTU)
Vibration withstand Vibration frequency10 to 55Hz, Amplitude 0.15mm, Sweep cycle 10 times
Protection category *4 Internal circuit IP54 equivalent
Conformity to standards EMC Directiv EN61000-6-4, EN61000-6-2
Low Voltage Directive EN60335-1, EN60335-2-40
UL standard UL60335-1, UL60335-2-40
CCC standard GB4706.1, GB4706.32, GB4343.1, GB17625.1
Environment RoHS2
Refrigerant R1234yf
(160g)
R1234yf
(300g)
R1234yf
(450g)
R1234yf
(1000g)
GWP *5 <1
Color Powder coating N8 corresponding, N4 corresponding
Dimensions(mm)*6
W300×H500×D200 W300×H600×D200 W390×H900×D250 W450×H1150×D250
Weight 20.0kg 23.0kg 34.0kg 53.0kg
*1 Nominal value when both of internal and external temperatures are +35℃.
*2 The permissible voltage variation during operation is within +5% to -10% to the rated value, which means instantaneous variation and does not mean a supply voltage constantly input.
*3 Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ ambient air are indicated in “Max” .
*4 Use only within the specified temperature range.
*5 By IPCC 5th Report 2013
*6 Excluding projections

Quick Selection

Simply input some information to see the best suited models and the required capacity for your application.



Product lineup

OCA-H350BCD-AW2

OCA-H350BCD-AW2

Cooling capacity

300/350W(50/60Hz)

A complete set of supply

●COOLCABI:1 pc. ●Fixing bolt (M6x35): 4 pcs.  ●Washer (M6): 4 pcs. ●Spring washer (M6): 4 pcs.  ●Nut (M6): 4 pcs. ●Packing:4m ●Alarm explanation sheet: 1 sheet ●Instruction manual: 1 copy

Consumable parts

Replacement fan Replacement filter Replacement evaporation sheet
Internal fan FM-11938P-AW-01 CF-S1 (2pcs/set) CJ-S1(1 pc)
External fan FM-15038M-AW230-00

Performance diagram

Performance diagram

Dimensional drawing

外形寸法図

Mounting cutout

パネルカット図


OCA-H700BCD-AW2

OCA-H700BCD-A200

Cooling capacity

600/700W(50/60Hz)

A complete set of supply

●COOLCABI:1 pc. ●Fixing bolt (M6x35): 4 pcs.  ●Washer (M6): 4 pcs. ●Spring washer (M6): 4 pcs.  ●Nut (M6): 4 pcs. ●Packing:4m ●Alarm explanation sheet: 1 sheet ●Instruction manual: 1 copy

Consumable parts

Replacement fan Replacement filter Replacement evaporation sheet
Internal fan FM-15038P-AW230-00 CF-S1 (2pcs/set) CJ-S1(1 pc)
External fan FM-15038M-AW230-00

Performance diagram

能力グラフ

Dimensional drawing

外形寸法図

Mounting cutout

パネルカット図


OCA-H1300BCD-AW2

OCA-H1000BC-A200

Cooling capacity

1100/1300W(50/60Hz)

A complete set of supply

●COOLCABI:1 pc. ●Fixing bolt (M8x35): 6 pcs.  ●Washer (M8): 6 pcs. ●Spring washer (M8): 6 pcs.  ●Nut (M8): 6 pcs. ●Packing:4m ●Alarm explanation sheet: 1 sheet ●Instruction manual: 1 copy

Consumable parts

Replacement fan Replacement filter Replacement evaporation sheet
Internal fan FM-15038P-AW230-00 CF-S8 (2pcs/set) CJ-S3(1 pc)
External fan FM-15038M-AW230-00

Performance diagram

能力グラフ

Dimensional drawing

外形寸法図

Mounting cutout

パネルカット図


OCA-H2300BCD-AW2

OCA-H1600BC-A200

Cooling capacity

2100/2300W(50/60Hz)

A complete set of supply

●COOLCABI:1 pc. ●Fixing bolt (M8x35): 6 pcs.  ●Washer (M8): 6 pcs. ●Spring washer (M8): 6 pcs.  ●Nut (M8): 6 pcs. ●Packing:4m ●Alarm explanation sheet: 1 sheet ●Instruction manual: 1 copy

Consumable parts

Replacement fan Replacement filter Replacement evaporation sheet
Internal fan FM-15038P-AW230-00 CF-S2 (2pcs/set) CJ-S4(1 pc)
External fan FM-15038M-AW230-00

Performance diagram

能力グラフ

Dimensional drawing

外形寸法図

Mounting cutout

パネルカット図


Option/Related products

Adjustable louver set

Provides linearity and directionality to cool air in the enclosure for cooling heat spot directly and making the overall temperature inside the enclosure evenly

Duct kit

Use of Duct kit allows cooling from a separately-placed COOLCABI.

Cautions

・Locate the unit so as to assure good ventilation and distance of at least 200mm from the walls or other units.
・Failure to this may degrade cooling performance of the unit and cause condensation.
・Setting temperature should be basically at 35℃. Avoid setting at an unnecessarily low value.
・Electrical connection should be made via appropriate circuit breakers.
・This product is designed for indoor use only.
・Do not use this product in the following places.
 - A place where corrosive or flammable gases exist in the air, or where the insulation destruction occurs.
 - A place where the product may be subject to shock or vibration.
・Make sure that electrical wiring work is done by qualified electrician.
・Check for damage on packaging when the product is delivered. .Any packaging damage can lead to a cause of malfunction. Make sure that there is no damage on the package on delivery and contact your supplier, if any.