Go to global navigation

Read the article

Go to local navigation

Go to footer

Quick selection
Enclosure cooler COOLCABI

＜ Return to "COOLCABI Lineup"

Please get the following information beforehand.

  • （1）Outside dimensions of Enclosure (WHD) in mm
  • （2）Estimated calorific value (W) or equipment information (capacity, quantity, etc.) inside the enclosure or, if calorific value is not available, measured ambient and enclosure interior temperatures
  • （3）Max. Ambient Temp. (estimate) and Desired Setting Temp.
Enter the information necessary for selecting a model

Enclosure information

Enter the information of Enclosure

Dimensions

Enter the width, height and depth of enclosure.
Dimensions
mm Enter the value of W (no less than 220mm)
mm Enter the value of H (no less than 470mm)
mm Enter the value of D (no less than 220mm)

Door configuration

Select the door configuration from the following options.
Double

Double
Single (Left hand)

Single
(Left hand)
Single (Right hand)

Single
(Right hand)

Installation condition (layout) of enclosure

Check heat releasing area and select the condition from the following options.
① One side is blocked.

① One side is blocked.
② Two sides are blocked.

② Two sides are blocked.
③ Two sides are blocked.

③ Two sides are blocked.
④ Three sides are blocked.

④ Three sides are blocked.
⑤ Three sides are blocked.

⑤ Three sides are blocked.
⑥ Four sides are blocked.

⑥ Four sides are blocked.
⑦ Rear side is blocked.(wall-mounted)

⑦ Rear side is blocked.(wall-mounted)
⑧ No blockage in heat releasing.(wheeled, etc.)

⑧ No blockage in heat releasing.(wheeled, etc.)

Temperature condition

Set the max. ambient temperature (estimate) and the desired setting temp.

[+20 to＋50℃]

*The highest possible temperature at the site of use

T1
℃ Set the value using the arrow keys.

[+30 to +45℃]

T2
℃ Set the value using the arrow keys.

Temperature
difference
[ ⊿T ]

(% calcT1 %)℃

Calorific value inside the enclosure

Enter the information of Calorific value
Choose the calculation method.

1. Enter the value (estimate) directly.

W Enter the calorific value.

3. Enter the measured values of ambient temperature and internal temperature.

T1
℃ Enter the measured ambient temperature.
T2
℃ Enter the measured internal temperature.

Temperature
difference between
the measured values
[ ⊿T2 ]

(% calcT2 %)℃

Calorific value inside
the enclosure
(% heatingValueInBoard | decimalPointDisplay | numberDelimiter %)W

As the value is out of the working temperature range of COOLCABI, no model matches to your application.
(Calorific value calculation is possible)

2．Calorific value is UNKNOWN/Calculate from inner components

Installation condition (layout) of enclosure

Calculate the calorific value in the enclosure as a rough standard by inputting equipment information.
Select a component from the "Electric components list" and input its rated output and quantity.

This information has been adapted from “Technical data No. 001-2018 Calorific value guideline for electric components in cabinets”
by Thermal Solution Equipment for Cabinet Technical Association , Japan.

Electric components list

Electric components
in the enclosure
Name
Rated output
Calorific
value
Number
of units
Total calorific value
Delete

Electric components
in the enclosure

(% item.label %)

Name

Number
of units

units

Total calorific value

(% item.calorificValueSum | decimalPointDisplay %)W

Delete

Calorific value of
electric components
Total
(% deviceTotalCalorificValueSumCalc | decimalPointDisplay | numberDelimiter %)W

Mounting position / Power supply

Enter the type of Mounting

Mounting position

Choose the mounting position.

Supply voltage

Choose the supply voltage.

Frequency

Choose the frequency.