Option OA-QTM Protection Cap
Prevents dust accumulation between a cabtyre cable and wires
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model Specifications
| Model | Max. applicable cable diameter | Applicable product | Color | Weight | Q'ty per package | |
| 1st tier | 2nd tier | |||||
| QTM-34C | Ø8×2 pcs. | Ø11×2 pcs. | OA-QTM34 | Black | 11g | 20 pcs. |
| QTM-44C | Ø8×2 pcs. | Ø12×2 pcs. | OA-QTM44 | 14g | ||
| QTM-64C | Ø8×4 pcs. | Ø11×4 pcs. | OA-QTM64 | 15g | 10 pcs. | |
| QTM-633C | Ø8×4 pcs. | Ø10.5×4 pcs. | OA-QTM633 | 14g | ||
| QTM-834C | Ø8×4 pcs. | Ø11.5×4 pcs. | OA-QTM834 | 18g | ||
| QTM-844C | Ø11×4 pcs. | Ø14×4 pcs. | OA-QTM844 | 26g | 5 pcs. | |
Working temperature : -20 to +60℃
・Only occasionally the inner side of Protection Cap have some cavities due to air bubbles formed in DIP molding process. However, this will have no impact on functions.
・Any of Protection Caps is not applicable to other products than specified above.
・Only occasionally the inner side of Protection Cap have some cavities due to air bubbles formed in DIP molding process. However, this will have no impact on functions.
・Any of Protection Caps is not applicable to other products than specified above.
Dimensional drawing
Materials
Vinyl chloride
The soft material tightly fits to the upper part of OA-QTM.
Cut the downside of the cap to fit the outer diameter of your cabtyre cable.
Cut the downside of the cap to fit the outer diameter of your cabtyre cable.
Instructions
1. Make wire connection to OA-QTM.
2. Fit in the housing of OA-QTM.
3. Push down the housing until it makes a clicking sound.
4. Fit Protection Cap on.
5. Tie up the end.
Cautions
・Use and storage under the following conditions should be avoided. Failure to it can lead to deterioration of product quality.
- Outside the range of working humidity and temperature
- Water vapor contained or high temperature/humidity air
- Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）
