Insulation cap for metric screw terminals BISCAP
Simply press it over an existing terminal to secure insulation!
Features
| Color | Rated voltage |
| Translucent | 600V |
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
・Applications Insulating and protecting bare wire terminals on various instruments and components in electrical service panels
Contents of page
Model/Specifications
| Model | Rated voltage | Applicable screw | Working temperature | Weight | Q'ty per package | |
| Round top for screw terminals | OA-BCP3 | 600V AC/DC |
M3/M4 | -20 to +60℃ | 2g | 50 pcs. |
| OA-BCP4 | 3g | |||||
| OA-BCP5 | M5 | 4g | ||||
| Angle top for stud bolt | OA-BC5 | - | M4/M5 hex nut | 1g | ||
Dimensional drawing
Materials
Instructions
＜OA-BCP＞
Press it over terminals to cover the terminal screws.
Press it over terminals to cover the terminal screws.
＜OA-BC＞
Press it over terminals to cover the terminal's nut and bolt.
Press it over terminals to cover the terminal's nut and bolt.
Cautions
・Due to property of the plastic, deformation can occur by external force. If you feel it hard, open it lightly before attaching.
・Do no use other crimp terminals than specified.
・Make sure that BISCAP is properly fixed after attaching it.
・Do not work while current is applied.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
＜OA-BC5＞
・OA-BC5 is designed for insulation and protection for stud bolts and not for all terminal part including crimp terminals.
・Press BISCAP down until hex nut is fully covered.
・Make sure that BISCAP is secured after attaching it.
・Provide insulation to crimped terminals using a marking tube or the like.
・Do no use other crimp terminals than specified.
・Make sure that BISCAP is properly fixed after attaching it.
・Do not work while current is applied.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
- Outside the range of working temperature
- Water vapor contained or high temperature/humidity air
- Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）
＜OA-BC5＞
・OA-BC5 is designed for insulation and protection for stud bolts and not for all terminal part including crimp terminals.
・Press BISCAP down until hex nut is fully covered.
・Make sure that BISCAP is secured after attaching it.
・Provide insulation to crimped terminals using a marking tube or the like.
