Mounting base RESLOCK
Easy to install in positions where hole drilling and tapping are difficult
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
・Applications For electrical service panels, electrical control panels and a variety of other applications
Contents of page
Model/Specifications
| Model | Fitting method | Thread for component mount | Color | Working temperature | Weight | Q'ty per package |
| OL-A3 | by instant glue | M3 | Orange | -20 to +70℃ | 3g | 100 pcs. |
| OL-A4 | Yellow | 3g | ||||
| OL-B4 | M4 | Black | 10g | 30 pcs. | ||
| OL-B5 | M5 | Gray | 10g | |||
| OL-E3 | by screwing with a M4 flat-head screw |
M3 | Orange | 2g | 500 pcs. | |
| OL-E4 | M4 | Yellow | 2g |
Dimensional drawing
Materials
Instructions
For type OL-A and OL-B
1. Clean the mounting surface area. No contamination on the surface (dust, oil rust) is allowed.
2. Install RESLOCK.
2-1) Place RESLOCK and adjust four molded tips referring to the position lines.
2-2) Drop or inject a drop of glue into glue hole(s).
Only one drop (about 0.03 cc) per each glue hole is appropriate.
2-3) Press and hold RESLOCK as required by the glue manufacturer's instructions.
3. Install components.
・Adhesives made out from polyethylene, polypropylene, inert resin and fluorine resin are not permissible to use.
・Low viscosity (2mPa・s) instantaneous chemical adhesive (such as Crazy Glue) is recommended.
・Low viscosity (2mPa・s) instantaneous chemical adhesive (such as Crazy Glue) is recommended.
For type OL-E
1. Install RESLOCK.
This model is for screw fixing only.
Use a flat top screw of M4 size.
Use a flat top screw of M4 size.
Cautions
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
- Outside the range of working temperature
- Water vapor contained or high temperature/humidity air
- Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"）
