Go to global navigation

Read the article

Go to local navigation

Go to footer

Environmental solution-DUST

Home > Environmental solution-DUST > Compact dust collector"DUSTCUBE" lineup > For General Environments High volume type Laser marker use OSK-DS

For General Environments High volume type Laser marker use OSK-DS

See-through cover enables visual checking of operating condition.
Suitable for laser markers in general environments



Environment of use Type Specifications
General High volume Laser marker use Deodorant Operation panel Remote operation



Quick Selection

To find out the required capacity, simply enter the information on your use environment.


Model OSK-250-DS-B
Max. air volume 5.5m3/min
Max. static pressure 1.85kPa
Collection efficiency Min.99% (for 10μm or larger particles)
Rated voltage (50/60Hz) Single phase, 100VAC
Rated current 6.5 A
Working temperature 0 to +40℃
Working humidity 80%RH or less, free from condensation
Noise 67 dB(A)
Max. intake temperature +40℃
Conformity to standard Environmental standard RoHS2
Weight 22.3 kg
  • Supply voltage should be as specified above with permissible fluctuations of 10%.



①Primary filter (Pre-filter)
A filter pack consisting of five layer nonwoven polypropylene fabric.
Each layer has different air permeability,and thus filter is not easily clogged having capability of capturing more than 95% of 45μm or larger particles. Unlike paper-made filter pack, not easily tears.
The transparent front cover allows to see the amount of dust collected.

②Secondary filter
A polyester molded filter integrated into ABS frame.
Designed for ease of maintenance having capability of capturing more than 99% of 10μm or larger particles.

Operation panel


Remote control

By connecting an optional remote cable, remote operation is enabled.


Remote cable entry
on dust collector side

・ON/OFF switching
・Enables to output the signals of operation pressure and overload.

  1. Operation input
  2. -
  3. -
  4. Remote operation input
  5. Operation output 
  6. Overload output
  7. Service power
  8. GND

Product lineup

Contents of page



Max. air volume


Max. static pressure


A complete set of supply

DUST CUBE : 1 unit Power cable : 3m long Instruction manual : 1 copy

Performance curve


Dimensional drawing


Maintenance parts


Primary Secondary
Filter name Filter pack Cylindrical filter
Part number FB-700-16 CS-300-150
Collection rate Min. 95% for 45μm Min. 99% for 10μm
Dimensions H700×W160 Ø300 L150
Filter material Polypropylene and cardboard Polyester and fibrous active carbon
Q'ty per package 5 pcs/set 1 pc.


Remote cable Length
RC-03M 3 m
RC-05M 5 m


・DUST CUBE is designed for inhaling common dust or odor. Never use this product for inhaling the following substances.
 - Flammable substances including gasoline, thinner, benzine, kerosene and organic solvent.
 - Explosive substances such as aluminium, magnesium, titanium, zinc or epoxy as well as materials ridden with those substances
 - Dusts containing sparks generated by high-speed cutter, grinder or other machinery
 - Cigarette smoke, and
 - Liquid like water, oil and chemicals

・Do not use this product in a place where flammable or corrosive gasses or any matters that can destroy insulation generate or permeate.
・This product is for indoor use only.
・The site of use should be free from vibration and impact.
・Make sure that the packaging is not damaged on delivery and contact your supplier, if any.